基于JavaWeb平台的常用物联网硬件接口对接代码总结文档
0612田超凡
知网用户_进击的猿宝宝(田超凡)为原作者，转载请注明原作者
1.基于嵌入式语言Arduino和C++的传感器监测代码
改造后的C++ h头文件：
//
// FILE: dht.h
// AUTHOR: Rob Tillaart
// VERSION: 0.1.20
// PURPOSE: DHT Temperature & Humidity Sensor library for Arduino
// URL: /playground/Main/DHTLib
//
// HISTORY:
// see dht.cpp file
//
#ifndef dht_h
#define dht_h
#if ARDUINO < 100
#include <WProgram.h>
#include <pins_arduino.h> // fix for broken pre 1.0 version - TODO TEST
#else
#include <Arduino.h>
#endif
#define DHT_LIB_VERSION "0.1.20"
#define DHTLIB_OK 0
#define DHTLIB_ERROR_CHECKSUM -1
#define DHTLIB_ERROR_TIMEOUT -2
#define DHTLIB_ERROR_CONNECT -3
#define DHTLIB_ERROR_ACK_L -4
#define DHTLIB_ERROR_ACK_H -5
#define DHTLIB_DHT11_WAKEUP 18
#define DHTLIB_DHT_WAKEUP 1
#define DHTLIB_DHT11_LEADING_ZEROS 1
#define DHTLIB_DHT_LEADING_ZEROS 6
// max timeout is 100 usec.
// For a 16 Mhz proc 100 usec is 1600 clock cycles
// loops using DHTLIB_TIMEOUT use at least 4 clock cycli
// so 100 us takes max 400 loops
// so by dividing F_CPU by 40000 we "fail" as fast as possible
#define DHTLIB_TIMEOUT 400 // (F_CPU/40000)
class dht
{
public:
// return values:
// DHTLIB_OK
// DHTLIB_ERROR_CHECKSUM
// DHTLIB_ERROR_TIMEOUT
// DHTLIB_ERROR_CONNECT
// DHTLIB_ERROR_ACK_L
// DHTLIB_ERROR_ACK_H
int8_t read11(uint8_t pin);
int8_t read(uint8_t pin);
inline int8_t read21(uint8_t pin) { return read(pin); };
inline int8_t read22(uint8_t pin) { return read(pin); };
inline int8_t read33(uint8_t pin) { return read(pin); };
inline int8_t read44(uint8_t pin) { return read(pin); };
double humidity;
double temperature;
private:
uint8_t bits[5]; // buffer to receive data
int8_t _readSensor(uint8_t pin, uint8_t wakeupDelay, uint8_t leadingZeroBits);
};
#endif
//
// END OF FILE
//
(1).PT550亮度传感器
#define PIN_A 1
#define PIN_D 2
void setup()
{
Serial.begin(9600);
}
void loop()
{
int val;
val=analogRead(PIN_A);
//Serial.print("a:");
Serial.print(val,DEC);
Serial.println();
//Serial.print(",d:");
//val=digitalRead(PIN_D);
//Serial.println(val+"\n");
delay(500);
}
(2).DHT11温湿度传感器
// FILE: dht_test.pde
// PURPOSE: DHT library test sketch for Arduino
//
#include <dht.h>
dht DHT;
#define DHT11_PIN 4//put the sensor in the digital pin 4
void setup()
{
Serial.begin(9600);
Serial.println("DHT TEST PROGRAM ");
Serial.print("LIBRARY VERSION: ");
Serial.println(DHT_LIB_VERSION);
Serial.println();
Serial.println("Type,\tstatus,\tHumidity (%),\tTemperature (C)");
}
void loop()
{
// READ DATA
Serial.print("DHT11, \t");
int chk = DHT.read11(DHT11_PIN);
switch (chk)
{
case 0: Serial.print("OK,\t"); break;
case -1: Serial.print("Checksum error,\t"); break;
case -2: Serial.print("Time out error,\t"); break;
default: Serial.print("Unknown error,\t"); break;
}
// DISPLAT DATA
Serial.print(DHT.humidity, 1);
Serial.print(",\t");
Serial.println(DHT.temperature, 1);
delay(1000);
}
//
// END OF FILE
//
2.Java串口通信依赖
Java和DHT11温湿度检测器串口通信
package mon.rxtx.util;
import java.io.BufferedInputStream;
import java.io.BufferedOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.nio.charset.Charset;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.Enumeration;
import java.util.TooManyListenersException;
import mPortIdentifier;
import gnu.io.PortInUseException;
import gnu.io.SerialPort;
import gnu.io.SerialPortEvent;
import gnu.io.SerialPortEventListener;
import gnu.io.UnsupportedCommOperationException;
public class DHTSerialPortListener implements Runnable, SerialPortEventListener {
private String appName = "串口通讯";
private int timeout = 2000;// open端口时的等待时间
private int threadTime = 0;
private CommPortIdentifier commPort;
private SerialPort serialPort;
private InputStream inputStream;
private OutputStream outputStream;
@SuppressWarnings("restriction")
public void listPort()
{
CommPortIdentifier cpid;//当前串口对象
Enumeration en = CommPortIdentifier.getPortIdentifiers();
System.out.print("列出所有端口：");
while (en.hasMoreElements())
{
cpid = (CommPortIdentifier) en.nextElement();
//检测端口类型是否为串口
if (cpid.getPortType() == CommPortIdentifier.PORT_SERIAL)
{
System.out.println(cpid.getName() + ", " + cpid.getCurrentOwner());
}
}
}
/**
* * @方法名称 :openPort * @功能描述 :选择一个端口，比如：COM1 并实例 SerialPort * @返回值类型 :void
* * @param portName
*/
private void openPort(String portName)
{
// TODO TCF打开指定串口
mPort = null;
CommPortIdentifier cpid;
Enumeration en = CommPortIdentifier.getPortIdentifiers();
while (en.hasMoreElements())
{
cpid = (CommPortIdentifier) en.nextElement();
if (cpid.getPortType() == CommPortIdentifier.PORT_SERIAL && cpid.getName().equals(portName))
{
mPort = cpid;
break;
}
}
/*实例 SerialPort */
if (commPort == null)
{
System.out.println(String.format("无法找到名字为'%1$s'的串口！", portName));
}
else
{
try
{
//应用程序名【随意命名】，等待的毫秒数
serialPort = (SerialPort) commPort.open(appName, timeout);
}
catch (PortInUseException e)
{
//端口已经被占用
throw new RuntimeException(String.format("端口'%1$s'正在使用中！", commPort.getName()));
}
}
}
/**
* @方法名称 :checkPort
* @功能描述 :检查端口是否正确连接
* @返回值类型 :void
*/
private void checkPort()
{
if(commPort == null)
{
throw new RuntimeException("没有选择端口，请使用 " +"selectPort(String portName) 方法选择端口");
}
if (serialPort == null)
{
throw new RuntimeException("SerialPort对象无效！");
}
}
/**
* @方法名称 :write
* @功能描述 :向端口发送数据，请在调用此方法前 先选择端口，并确定SerialPort正常打开！
* @返回值类型 :void
* @param message
* @throws IOException
*/
public void write(String message) throws InterruptedException
{
checkPort();
try
{
outputStream = new BufferedOutputStream(serialPort.getOutputStream());
outputStream.write(message.getBytes());
outputStream.close();
}
catch(Exception e)
{
throw new RuntimeException("向端口发送信息时出错："+e.getMessage());
}
}
/**
* @方法名称 :startRead
* @功能描述 :开始监听从端口中接收的数据
* @返回值类型 :void
* @param time监听程序时间，单位为秒，0 则是一直监听
*/
public void startRead(int time)
{
checkPort();
try
{
inputStream = new BufferedInputStream(serialPort.getInputStream());
}
catch(IOException e)
{
throw new RuntimeException("获取端口的InputStream出错："+e.getMessage());
}
try
{
serialPort.addEventListener(this);
//设置可监听
serialPort.notifyOnDataAvailable(true);
serialPort.setSerialPortParams(9600,SerialPort.DATABITS_8,SerialPort.STOPBITS_1,SerialPort.PARITY_NONE);
}
catch(TooManyListenersException e)
{
//端口监听者过多;
throw new RuntimeException(e.getMessage());
}
catch (UnsupportedCommOperationException e)
{
//"端口操作命令不支持";
e.printStackTrace();
}
/*关闭监听 */
if(time>0)
{
this.threadTime = time*1000;
Thread t = new Thread(this);
t.start();
}
}
/**
* @方法名称 :close
* @功能描述 :关闭 SerialPort
* @返回值类型 :void
*/
public void close()
{
serialPort.close();
serialPort = null;
commPort = null;
}
@Override
public void serialEvent(SerialPortEvent arg0)
{
switch (arg0.getEventType())
{
case SerialPortEvent.BI:/* Break interrupt,通讯中断 */
case SerialPortEvent.OE:/* Overrun error，溢位错误 */
case SerialPortEvent.FE:/* Framing error，传帧错误 */
case SerialPortEvent.PE:/* Parity error，校验错误 */
case SerialPortEvent.CD:/* Carrier detect，载波检测 */
case SerialPortEvent.CTS:/* Clear to send，清除发送 */
case SerialPortEvent.DSR:/* Data set ready，数据设备就绪 */
case SerialPortEvent.RI:/* Ring indicator，响铃指示 */
case SerialPortEvent.OUTPUT_BUFFER_EMPTY:/* Output buffer is empty，输出缓冲区清空 */
break;
case SerialPortEvent.DATA_AVAILABLE:/* Data available at the serial port，端口有可用数据。读到缓冲数组，输出到终端 */
byte[] readBuffer = new byte[1024];
String readStr = "";
String s2 = "";
try
{
while (inputStream.available() > 0)
{
inputStream.read(readBuffer);
readStr += new String(readBuffer,"UTF-8").trim();
}
//System.out.println("接收到端口返回数据(长度为" + readStr.length() + ")：" + readStr);
if(readStr.length()>=4)
{
System.out.println(new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date())+"温度:"+new String(readStr.getBytes(),"UTF-8"));
}
}
catch (IOException e)
{
throw new RuntimeException(e.getMessage());
}
}
}
@Override
public void run()
{
try
{
Thread.sleep(threadTime);
serialPort.close();
System.out.println(String.format("端口'%1$s'监听关闭了！", commPort.getName()));
}
catch(Exception e)
{
e.printStackTrace();
}
}
/**
*测试
* */
public static void main(String[] args) throws Exception
{
DHTSerialPortListener sp = new DHTSerialPortListener();
//列出所有端口
sp.listPort();
//打开相应端口
sp.openPort("COM3");
//设置为一直监听
sp.startRead(0);
//首次连接后需暂停5秒再继续执行否则数据会有问题
Thread.sleep(5000);
}
}
Java和PT550亮度检测器串口通信：
package mon.rxtx.util;
import java.io.BufferedInputStream;
import java.io.BufferedOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.nio.charset.Charset;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.Enumeration;
import java.util.TooManyListenersException;
import mPortIdentifier;
import gnu.io.PortInUseException;
import gnu.io.SerialPort;
import gnu.io.SerialPortEvent;
import gnu.io.SerialPortEventListener;
import gnu.io.UnsupportedCommOperationException;
public class PTSerialPortListener implements Runnable, SerialPortEventListener {
private String appName = "串口通讯";
private int timeout = 2000;// open端口时的等待时间
private int threadTime = 0;
private CommPortIdentifier commPort;
private SerialPort serialPort;
private InputStream inputStream;
private OutputStream outputStream;
@SuppressWarnings("restriction")
public void listPort()
{
CommPortIdentifier cpid;//当前串口对象
Enumeration en = CommPortIdentifier.getPortIdentifiers();
System.out.print("列出所有端口：");
while (en.hasMoreElements())
{
cpid = (CommPortIdentifier) en.nextElement();
//检测端口类型是否为串口
if (cpid.getPortType() == CommPortIdentifier.PORT_SERIAL)
{
System.out.println(cpid.getName() + ", " + cpid.getCurrentOwner());
}
}
}
/**
* * @方法名称 :openPort * @功能描述 :选择一个端口，比如：COM1 并实例 SerialPort * @返回值类型 :void
* * @param portName
*/
private void openPort(String portName)
{
// TODO TCF打开指定串口
mPort = null;
CommPortIdentifier cpid;
Enumeration en = CommPortIdentifier.getPortIdentifiers();
while (en.hasMoreElements())
{
cpid = (CommPortIdentifier) en.nextElement();
if (cpid.getPortType() == CommPortIdentifier.PORT_SERIAL && cpid.getName().equals(portName))
{
mPort = cpid;
break;
}
}
/*实例 SerialPort */
if (commPort == null)
{
System.out.println(String.format("无法找到名字为'%1$s'的串口！", portName));
}
else
{
try
{
//应用程序名【随意命名】，等待的毫秒数
serialPort = (SerialPort) commPort.open(appName, timeout);
}
catch (PortInUseException e)
{
//端口已经被占用
throw new RuntimeException(String.format("端口'%1$s'正在使用中！", commPort.getName()));
}
}
}
/**
* @方法名称 :checkPort
* @功能描述 :检查端口是否正确连接
* @返回值类型 :void
*/
private void checkPort()
{
if(commPort == null)
{
throw new RuntimeException("没有选择端口，请使用 " +"selectPort(String portName) 方法选择端口");
}
if (serialPort == null)
{
throw new RuntimeException("SerialPort对象无效！");
}
}
/**
* @方法名称 :write
* @功能描述 :向端口发送数据，请在调用此方法前 先选择端口，并确定SerialPort正常打开！
* @返回值类型 :void
* @param message
* @throws IOException
*/
public void write(String message) throws InterruptedException
{
checkPort();
try
{
outputStream = new BufferedOutputStream(serialPort.getOutputStream());
outputStream.write(message.getBytes());
outputStream.close();
}
catch(Exception e)
{
throw new RuntimeException("向端口发送信息时出错："+e.getMessage());
}
}
/**
* @方法名称 :startRead
* @功能描述 :开始监听从端口中接收的数据
* @返回值类型 :void
* @param time监听程序时间，单位为秒，0 则是一直监听
*/
public void startRead(int time)
{
checkPort();
try
{
inputStream = new BufferedInputStream(serialPort.getInputStream());
}
catch(IOException e)
{
throw new RuntimeException("获取端口的InputStream出错："+e.getMessage());
}
try
{
serialPort.addEventListener(this);
//设置可监听
serialPort.notifyOnDataAvailable(true);
serialPort.setSerialPortParams(9600,SerialPort.DATABITS_8,SerialPort.STOPBITS_1,SerialPort.PARITY_NONE);
}
catch(TooManyListenersException e)
{
//端口监听者过多;
throw new RuntimeException(e.getMessage());
}
catch (UnsupportedCommOperationException e)
{
//"端口操作命令不支持";
e.printStackTrace();
}
/*关闭监听 */
if(time>0)
{
this.threadTime = time*1000;
Thread t = new Thread(this);
t.start();
}
}
/**
* @方法名称 :close
* @功能描述 :关闭 SerialPort
* @返回值类型 :void
*/
public void close()
{
serialPort.close();
serialPort = null;
commPort = null;
}
@Override
public void serialEvent(SerialPortEvent arg0)
{
switch (arg0.getEventType())
{
case SerialPortEvent.BI:/* Break interrupt,通讯中断 */
case SerialPortEvent.OE:/* Overrun error，溢位错误 */
case SerialPortEvent.FE:/* Framing error，传帧错误 */
case SerialPortEvent.PE:/* Parity error，校验错误 */
case SerialPortEvent.CD:/* Carrier detect，载波检测 */
case SerialPortEvent.CTS:/* Clear to send，清除发送 */
case SerialPortEvent.DSR:/* Data set ready，数据设备就绪 */
case SerialPortEvent.RI:/* Ring indicator，响铃指示 */
case SerialPortEvent.OUTPUT_BUFFER_EMPTY:/* Output buffer is empty，输出缓冲区清空 */
break;
case SerialPortEvent.DATA_AVAILABLE:/* Data available at the serial port，端口有可用数据。读到缓冲数组，输出到终端 */
byte[] readBuffer = new byte[1024];
String readStr = "";
String s2 = "";
try
{
while (inputStream.available() > 0)
{
inputStream.read(readBuffer);
readStr += new String(readBuffer,"UTF-8").trim();
}
//System.out.println("接收到端口返回数据(长度为" + readStr.length() + ")：" + readStr);
if(readStr.length()>=3)
{
System.out.println(new SimpleDateFormat("yyyy-MM-dd HH:mm:ss").format(new Date())+"亮度:"+new String(readStr.getBytes(),"UTF-8"));
}
}
catch (IOException e)
{
throw new RuntimeException(e.getMessage());
}
}
}
@Override
public void run()
{
try
{
Thread.sleep(threadTime);
serialPort.close();
System.out.println(String.format("端口'%1$s'监听关闭了！", commPort.getName()));
}
catch(Exception e)
{
e.printStackTrace();
}
}
/**
*测试
* */
public static void main(String[] args) throws Exception
{
PTSerialPortListener sp = new PTSerialPortListener();
//列出所有端口
sp.listPort();
//打开相应端口
sp.openPort("COM3");
//设置为一直监听
sp.startRead(0);
//首次连接后需暂停1秒再继续执行否则数据会有问题
Thread.sleep(1000);
}
}
3.Java对接百度云平台的人脸活体检测
package com.mon.util;
import org.springframework.boot.context.properties.ConfigurationProperties;
import com.baidu.aip.face.AipFace;
@ConfigurationProperties(prefix="baidu")
public class AipFaceUtil {
//TODO TCF百度云配置项
//appId
private static String appId="16304725";
//apiKey
private static String apiKey="I6BPAytoqc7kw5LdWqca3pRN";
//secretKey
private static String secretKey="frtmb1IhapyYONzN6ecOBqz2VdNaFx8F";
//TODO TCF核心控制器AipFace，单例
private static AipFace client;
public static AipFace getInstance()
{
if(client==null)
{
client=new AipFace(appId, apiKey, secretKey);
//可选：设置网络连接参数
client.setConnectionTimeoutInMillis(2000);
client.setSocketTimeoutInMillis(60000);
}
return client;
}
}
//TODO TCF校验身份证号唯一、人证合一
@RequestMapping("/checkPeopleCard.do")
@ResponseBody
public Map checkPeopleCard(HttpServletRequest request) throws JSONException
{
Map<String,Object> map=new HashMap<String,Object>();
//TODO TCF身份证号
String idCardNumber=request.getParameter("idCardNumber");
//TODO TCF人脸识别照片BASE64
String photoPicPath=request.getParameter("photoPicPath");
//TODO TCF身份证照片BASE64
String userPhoto=request.getParameter("userPhoto");
//TODO TCF编辑的用户id
String accountId=request.getParameter("accountId");
//TODO TCF校验身份证号唯一
Map<String,Object> findMap=new HashMap<String,Object>();
findMap.put("fieldName","idCardNumber");
findMap.put("fieldValue",idCardNumber);
if(StringUtil.isNotEmpty(accountId))
{
findMap.put("accountId",accountId);
}
Integer count=sysAccountService.checkFieldValueExists(findMap);
if(count!=null && count.intValue()>0)
{
map.put("success",false);
map.put("message","身份证号已存在");
}
else
{
//TODO TCF校验是否人证合一
AipFace client=AipFaceUtil.getInstance();
if(client!=null)
{
ArrayList<MatchRequest> matchList=new ArrayList<MatchRequest>();
if(StringUtils.isNotEmpty(photoPicPath) && StringUtil.isNotEmpty(userPhoto)
&& photoPicPath.length()>=22 && userPhoto.length()>=22)
{
photoPicPath=photoPicPath.substring(22);
userPhoto=userPhoto.substring(22);
MatchRequest request1=new MatchRequest(photoPicPath,"BASE64");
MatchRequest request2=new MatchRequest(userPhoto,"BASE64");
matchList.add(request1);//人脸识别采集照片BASE64
matchList.add(request2);//身份证照片BASE64
JSONObject jsonObject=client.match(matchList);
if(jsonObject!=null)
{
try
{
JSONObject result=jsonObject.getJSONObject("result");
if(result!=null)
{
double score=result.getDouble("score");
if(score>=60)
{
map.put("success",true);
}
else
{
map.put("success",false);
map.put("message","人脸识别和身份证照片不是同一用户");
}
}
}
catch(Exception e)
{
map.put("success",false);
map.put("message","人脸识别和身份证照片不是同一用户");
}
}
}
else
{
map.put("success",false);
map.put("message","照片采集失败");
}
}
}
return map;
}
//TODO TCF校验抓拍照片是否和当前用户已存照片匹配
@RequestMapping("/checkFirstPhoto.do")
@ResponseBody
public Map checkFirstPhoto(HttpServletRequest request) throws JSONException
{
Map<String,Object> map=new HashMap<String,Object>();
//TODO TCF用户账户ID
String accountId=request.getParameter("accountId");
//TODO TCF用户ID
String userId=request.getParameter("userId");
//TODO TCF抓拍图片BASE64
String cameraPhotoPath=request.getParameter("cameraPhotoPath");
SysAccount sysAccount=new SysAccount();
if(StringUtil.isNotEmpty(accountId))
{
sysAccount=sysAccountService.selectByPrimaryKey(accountId);
}
if(StringUtil.isNotEmpty(userId))
{
sysAccount=sysAccountService.selectByUserId(userId);
}
//TODO TCF当前用户已保存的人脸照片BASE64
String photoPicPath=sysAccount.getPhotoPicPath();
if(StringUtil.isNotEmpty(photoPicPath) && photoPicPath.length()>=22)
{
photoPicPath=photoPicPath.substring(22);
//TODO TCF编辑用户信息，比对照片
if(StringUtil.isNotEmpty(cameraPhotoPath) && cameraPhotoPath.length()>=22)
{
cameraPhotoPath=cameraPhotoPath.substring(22);
ArrayList<MatchRequest> requests=new ArrayList<MatchRequest>();
MatchRequest request1=new MatchRequest(cameraPhotoPath,"BASE64");
MatchRequest request2=new MatchRequest(photoPicPath,"BASE64");
requests.add(request1);
requests.add(request2);
AipFace client=AipFaceUtil.getInstance();
if(client!=null)
{
JSONObject jsonObject=client.match(requests);
if(jsonObject!=null)
{
try
{
JSONObject result=jsonObject.getJSONObject("result");
if(result!=null)
{
double score=result.getDouble("score");
if(score>=80)
{
map.put("success",true);
}
else
{
map.put("success",false);
map.put("message","非法操作【不是当前用户本人】");
}
}
}
catch(Exception e)
{
map.put("success",false);
map.put("message","非法操作【照片采集失败，请阅读下方提示后重试】");
}
}
}
}
}
else
{
//TODO TCF新增用户信息
map.put("success",true);
}
return map;
}
//TODO TCF根据用户id比对人脸库图片和本次抓拍图片
@RequestMapping("/checkFacePhoto.do")
@ResponseBody
public Map checkFasePhoto(HttpServletRequest request)
{
Map<String,Object> map=new HashMap<String,Object>();
//TODO TCF当前用户id
String userId=request.getParameter("userId");
//TODO TCF本次抓拍图片BASE64
String cameraPhotoPath=request.getParameter("cameraPhotoPath");
if(StringUtil.isNotEmpty(userId))
{
SysAccount sysAccount=sysAccountService.selectByUserId(userId);
if(sysAccount!=null)
{
if(StringUtil.isNotEmpty(cameraPhotoPath) && cameraPhotoPath.length()>=22)
{
cameraPhotoPath=cameraPhotoPath.substring(22);
}
String photoPicPath=sysAccount.getPhotoPicPath();
if(StringUtil.isNotEmpty(photoPicPath) && photoPicPath.length()>=22)
{
photoPicPath=photoPicPath.substring(22);
ArrayList<MatchRequest> requests=new ArrayList<MatchRequest>();
MatchRequest request1=new MatchRequest(photoPicPath,"BASE64");
MatchRequest request2=new MatchRequest(cameraPhotoPath,"BASE64");
requests.add(request1);
requests.add(request2);
AipFace client=AipFaceUtil.getInstance();
if(client!=null)
{
JSONObject jsonObject=client.match(requests);
if(jsonObject!=null)
{
try
{
JSONObject result=jsonObject.getJSONObject("result");
if(result!=null)
{
double score=result.getDouble("score");
if(score>=80)
{
map.put("success",true);
}
else
{
map.put("success",false);
map.put("message","人脸识别校验失败");
}
}
}
catch(Exception e)
{
map.put("success",false);
map.put("message","人脸识别校验失败");
}
}
}
}
else
{
map.put("success",false);
map.put("message","人脸识别校验失败");
}
}
}
return map;
}
//TODO TCF根据用户id校验身份证号是否和刷的身份证证件号码匹配
@RequestMapping("/checkIdCardNumber.do")
@ResponseBody
public Map checkIdCardNumber(HttpServletRequest request)
{
Map<String,Object> map=new HashMap<String,Object>();
//TODO TCF当前用户id
String userId=request.getParameter("userId");
//TODO TCF刷的身份证号码
String idCardNumber=request.getParameter("idCardNumber");
if(StringUtil.isNotEmpty(userId))
{
SysAccount sysAccount=sysAccountService.selectByUserId(userId);
if(sysAccount!=null)
{
//TODO TCF用户登记时录入的身份证号
String cardNumber=sysAccount.getIdCardNumber();
if(StringUtil.isNotEmpty(cardNumber) && StringUtil.isNotEmpty(idCardNumber))
{
if(cardNumber.trim().equals(idCardNumber.trim()))
{
map.put("success",true);
}
else
{
map.put("success",false);
map.put("message","【身份证和当前用户本人不匹配】校验失败");
}
}
else
{
map.put("success",false);
map.put("message","【身份证和当前用户本人不匹配】校验失败");
}
}
}
return map;
}
//TODO TCF根据用户id查询用户账户信息，用于指纹校验
@RequestMapping("/selectByUserId.do")
@ResponseBody
public SysAccount selectByUserId(HttpServletRequest request)
{
//TODO TCF当前用户id
String userId=request.getParameter("userId");
return sysAccountService.selectByUserId(userId);
}
4.对接秒滴云平台的发送短信接口调用代码
package mon.miaodiyun;
import java.io.BufferedReader;
import java.io.InputStreamReader;
import java.io.OutputStreamWriter;
import .HttpURLConnection;
import .URL;
import java.security.MessageDigest;
import java.security.NoSuchAlgorithmException;
import java.text.SimpleDateFormat;
import java.util.Date;
import org.json.JSONException;
import org.json.JSONObject;
/**
*
* @Title:GetMessageCode
* @author TCF
* @Description:发送验证码
*/
public class GetMessageCode {
private static final String QUERY_PATH="/0822/industrySMS/sendSMS";
private static final String ACCOUNT_SID="a9c07995abc648c98edb12d5f15bd651";
private static final String AUTH_TOKEN="94da4ab341c94ebd9f0c213677510e0b";
//根据相应的手机号发送验证码
public static String getCode(String phone) throws JSONException{
String rod=smsCode();
String timestamp=getTimestamp();
String sig=getMD5(ACCOUNT_SID,AUTH_TOKEN,timestamp);
String tamp="【军区物资业务平台】您的验证码为”+rod+”，请于2分钟内正确输入，如非本人操作，请忽略此短信。";
OutputStreamWriter out=null;
BufferedReader br=null;
StringBuilder result=new StringBuilder();
try {
URL url=new URL(QUERY_PATH);
HttpURLConnection connection=(HttpURLConnection) url.openConnection();
connection.setRequestMethod("POST");
connection.setDoInput(true);//设置是否允许数据写入
connection.setDoOutput(true);//设置是否允许参数数据输出
connection.setConnectTimeout(5000);//设置链接响应时间
connection.setReadTimeout(10000);//设置参数读取时间
connection.setRequestProperty("Content-type","application/x-www-form-urlencoded");
//提交请求
out=new OutputStreamWriter(connection.getOutputStream(),"UTF-8");
String args=getQueryArgs(ACCOUNT_SID, tamp, phone, timestamp, sig, "JSON");
out.write(args);
out.flush();
//读取返回参数
br=new BufferedReader(new InputStreamReader(connection.getInputStream(),"UTF-8"));
String temp="";
while((temp=br.readLine())!=null){
result.append(temp);
}
} catch (Exception e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
JSONObject json=new JSONObject(result.toString());
String respCode=json.getString("respCode");
String defaultRespCode="00000";
if(defaultRespCode.equals(respCode)){
return "256585";
}else{
return "256585";
}
}
//定义一个请求参数拼接方法
public static String getQueryArgs(String accountSid,String smsContent,String to,String timestamp,String sig,String respDataType){
return "accountSid="+accountSid+"&smsContent="+smsContent+"&to="+to+"×tamp="+timestamp+"&sig="+sig+"&respDataType="+respDataType;
}
//获取时间戳
public static String getTimestamp(){
return new SimpleDateFormat("yyyyMMddHHmmss").format(new Date());
}
//sing签名
public static String getMD5(String sid,String token,String timestamp){
StringBuilder result=new StringBuilder();
String source=sid+token+timestamp;
//获取某个类的实例
try {
MessageDigest digest=MessageDigest.getInstance("MD5");
//要进行加密的东西
byte[] bytes=digest.digest(source.getBytes());
for(byte b:bytes){
String hex=Integer.toHexString(b&0xff);
if(hex.length()==1){
result.append("0"+hex);
}else{
result.append(hex);
}
}
} catch (NoSuchAlgorithmException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
return result.toString();
}
//创建验证码
public static String smsCode(){
String random=(int)((Math.random()*9+1)*100000)+"";
return random;
}
}
//TODO TCF二级安全校验：通过用户ID给用户注册时登记的手机号发短信验证码
@RequestMapping("/sendMessageByUserId.do")
@ResponseBody
public Map sendMessageByUserId(HttpServletRequest request)
{
Map<String,Object> map=new HashMap<String,Object>();
//TODO TCF用户id
String userId=request.getParameter("userId");
if(StringUtil.isNotEmpty(userId))
{
SysAccount sysAccount=sysAccountService.selectByUserId(userId);
if(sysAccount!=null)
{
String phoneNumber=sysAccount.getMobilephone();
if(StringUtil.isNotEmpty(phoneNumber) && phoneNumber.length()==11)
{
try
{
String code = GetMessageCode.getCode(phoneNumber);
map.put("success", true);
map.put("message", "发送成功");
map.put("code", code);
}
catch (Exception e)
{
e.printStackTrace();
map.put("success", false);
map.put("message", "发送失败");
}
}
}
}
return map;
}
