气泡尺寸分布,bubble size distribution
1)bubble size distribution气泡尺寸分布
1.Experiment and CFD simulation ofbubble size distribution in 2D gas-liquid bubble column;二维鼓泡床内气泡尺寸分布的实验与CFD模拟
2.Study onbubble size distribution and local gas holdup in bubble column;鼓泡塔中气泡尺寸分布和局部气含率研究
3.Thebubble size distribution of distillation trays is the key parameter for calculating distillation tray efficiencies, designing and operating distillation towers.精馏塔板上气泡尺寸分布是计算精馏塔板效率以及设计和操作精馏塔的关键参数,但对它的预测受到理论不完善、实验测试手段落后及求解计算困难等方面的限制。
2)bubble size气泡尺寸
1.Considering the effect ofbubble size,bubble distribution and bubble lifecycle on the DO of aeration tank in micro-pore bubble aeration systems,there was an optimal bubble group which could maximize DO in aeration tank.综合考虑气泡尺寸、气泡分布、气泡生命周期等对微孔曝气水体DO的影响效果,存在着使曝气效果达到最佳的最优气泡群。
2.The theoretical deduction proved that by reducing thebubble size, the three performances will be all improved.分析研究了气泡尺寸的变化在微细粒浮选中对浮选速率、浮选回收率以及气泡与矿粒的碰撞概率等三个方面指标的影响作用,指出在微细粒浮选中减小气泡尺寸是提高浮选效率的强有效措施。
3.Thereby,measuringbubble size must be emphasized in study of reducing cavitation damage.因此在掺气减蚀研究中,必须加强对气泡尺寸的检测。
英文短句/例句
1.Influence analysis and parameter optimization of bubble diameter in Micro-bubbles flotation process微泡浮选中气泡尺寸影响分析与参数优化
2.The bubble size is the one significant quantity which determines the conditions in the bed.气泡尺寸是决定床内情况的一个关键因数。
3.Bubble Size and Velocity Distribution in Bubble Column Reactor鼓泡床反应器中气泡尺寸和速率分布的实验研究
4.Numerical simulation of predict bubble generation diameter of aluminum foam泡沫铝制备过程气泡生成尺寸的数值模拟研究
5.The geometry of the vessel and its internals may limit the size of the bubbles.容器和其内部构件的几何形状可能限制气泡的尺寸。
6.A Research on Observation and Size Criterion of Primary Gas Bubbles In Semi-solid Precursor半固态先驱体中初生气泡的观察与尺寸判据研究
7.Test method for average cell size of rigid cellular plasticsGB/T12811-1991硬质泡沫塑料平均泡孔尺寸试验方法
8.For design it is important to be able to estimate the maximum expected size of bubbles in a bed.设计时要能估计出床层中气泡可望达到的最大尺寸这一点是很重要的。
9.Cellular plastics and rubbers--Determination of linear dimensionsGB/T6342-1996泡沫塑料与橡胶线性尺寸的测定
10." Lamps for road vehicles Dimensional, electrical and luminous requirements"GB15766.1-1995道路机动车辆灯泡尺寸、光电性能要求
11.An Auto-detecting and Classifying Device of the Size of Plate Level;水准泡尺寸的自动化检测分选装置及其研究
12.A FRACTAL STUDY ON MESO STRUCTURES AND SIZE EFFECT OF METALLIC FOAMS基于分形的泡沫金属细观结构与尺寸效应研究
13.Outlet connections and sizes for cylinder valvesGB15383-1994气瓶阀出气口连接型式和尺寸
14.Length (Tip-to-Gauge Dimension Line) Intake长度(接头-仪表尺寸线) 进气
15.Full scale burst experiment on high pressure test of gas pipelines输气管道高强度试压全尺寸爆破实验
16.full size drawing原尺寸图，实物尺寸图
17.foot in the door technique得寸进尺法得寸进尺法
18.The Scale Effect of Cavitating Flow on the Jet-Propelled Missile喷气推进导弹空泡流的尺度效应研究
相关短句/例句
bubble size气泡尺寸
1.Considering the effect ofbubble size,bubble distribution and bubble lifecycle on the DO of aeration tank in micro-pore bubble aeration systems,there was an optimal bubble group which could maximize DO in aeration tank.综合考虑气泡尺寸、气泡分布、气泡生命周期等对微孔曝气水体DO的影响效果,存在着使曝气效果达到最佳的最优气泡群。
2.The theoretical deduction proved that by reducing thebubble size, the three performances will be all improved.分析研究了气泡尺寸的变化在微细粒浮选中对浮选速率、浮选回收率以及气泡与矿粒的碰撞概率等三个方面指标的影响作用,指出在微细粒浮选中减小气泡尺寸是提高浮选效率的强有效措施。
3.Thereby,measuringbubble size must be emphasized in study of reducing cavitation damage.因此在掺气减蚀研究中,必须加强对气泡尺寸的检测。
3)size of bubble气泡尺寸
1.Flowing type of the two phases that flows in the horizontal pipe was studied through testing mainly,and the law of the bubble size produced in the bubbly flow was studied,and it was studied that thesize of bubbles changed when the experimental parameter was changed.主要通过试验研究了水平管内两相流的流型、泡状流中所产生的气泡尺寸沿水平管径向的变化规律,以及气泡尺寸随试验参数的改变而变化的情况。
4)size distribution尺寸分布
1.Morphology and Size Distribution Characteristics of a High Si Aluminum Alloy Powder Prepared by Gas Alomization Process;气体雾化高硅铝合金粉末形貌特征及尺寸分布
2.3-dimensional reconstruction ofsize distribution of air voids in air-entrained concrete;引气混凝土气泡尺寸分布的三维重构
3.A new method to measuresize distribution and concentration of microbubble ultrasound contrast agents;超声造影剂微泡尺寸分布及浓度测量方法
5)floam bubble size[纺]泡沫气泡尺寸
6)pore-size,distribution气孔尺寸分布情况
延伸阅读
炭黑颗粒尺寸分布分子式：CAS号：性质：造粒炭黑的一种性能指标。将一定量造粒炭黑通过一组不同规格的筛子，称取炭黑筛上部分的重量，计算颗粒尺寸的分布。颗粒尺寸分布的变化对炭黑在高聚物中的分散性、散装运输等均有影响。
