重塑黄土,remolded loess
1)remolded loess重塑黄土
1.Effects of specimen-preparing methods on tensile strength ofremolded loess制样方法对重塑黄土单轴抗拉强度影响的初探
2.Based on the analysis of infiltration characterist ic after experimenting on soil sampled from loess filling slope at BAOZHONG railway, the influential rules about consolidation degree on osmosis ofremolded loess were obtained, and analyzed the main forming reasons of diseases, then offered some corresponding foundations on construction control.通过对宝中铁路黄土路堤取样试验后所做的渗透特性分析 ,得出了压实度对重塑黄土渗透性影响的规律 ,分析了病害形成的主要原因 ,并为施工控制提供了相应的依
英文短句/例句
1.Experimental Investigation of Permeability Characteristics of Intact and Reshaped Loess原状黄土及重塑黄土渗透特性的试验研究
2.Test Analysis on the Elastic-Plastic Constitutive Model of Saturated Remodeling Loess饱和重塑黄土的弹塑性本构模型与试验分析
3.Study on Strength Property of Unsaturated Remoulded Loess;非饱和重塑黄土强度特性的试验研究
4.A Preliminary Study of Duncan-Chang Model Parameters for Remod-eling Loess重塑黄土邓肯-张模型参数初步研究
5.Effects of specimen-preparing methods on tensile strength of remolded loess制样方法对重塑黄土单轴抗拉强度影响的初探
6.Debugging of a New True Triaxial Apparatus and Experimental Study on the Strength-Deformation Characteristics of Remolded Loess;新型真三轴仪调试及重塑黄土强度变形特性的试验研究
7.Experimental Study on Triaxial Seepage of Disturbed Q_3 Loess in Different Regions不同地区重塑Q_3黄土三轴渗透试验研究
8.Elastoplastic modeling of unsaturated intact Q_2 loess with plastic work as hardening parameter以塑性功为硬化参数的Q_2原状黄土弹塑性模拟
9.Sculpturing is the Solidification of Human Culture History雕塑是凝固了的人类文化发展史——《黄天厚土雕塑展》作品评选有感
10.The Elasto-Plastic Damage Constitutive Model of Loess and Its Engineering Application;黄土弹塑性损伤本构模型及工程应用研究
11.The Structural Property Studies of the Unsaturated Loess and Its Elasto-Plastic Model Studies;非饱和黄土的结构性及其弹塑性本构模型研究
12.Research on the Elastic-Plastic Constitutive Relation of Loess Considering Structure;考虑结构性的黄土弹塑性本构关系探讨
13.Shear strength of Baise r emolded expansive soil百色重塑膨胀土抗剪强度的试验研究
14.Test on unsaturated-remolded-compacted cohesive soil in triaxial condition非饱和重塑压实粘土的三轴剪切试验
15.Research of National Instrument Music:Regression Localness and Remodeling Concept回归本土 重塑理念——民族器乐研究二题
16.Experimental research on water migration in remoulded soil during freezing and thawing process重塑土冻融过程中水分迁移试验研究
17.Research on the Dynamic Characteristics of Undisturbed and Remodeled Silt in Taiyuan太原地区原状粉土与重塑粉土动力特性研究
18.A Study of Curcumin on Ventricular Remodeling in Postinfarction Rats;姜黄素对心肌梗死后心室重塑影响的实验研究
相关短句/例句
saturated remodeled loess饱和重塑黄土
1.Through comparing the results of compression test and conventional triaxial drainage shear test based on the saturated original loess and thesaturated remodeled loess, we get the law of the stress and stain characteristics and strength characteristics which is effected by structure of the saturated original loess.通过对饱和原状黄土以及饱和重塑黄土的室内压缩试验和常规三轴排水剪切试验的结果对比,得出结构性对饱和原状黄土应力应变和强度特性的影响规律。
3)unsaturated remolded loess非饱和重塑黄土
1.The tri-axial tests ofunsaturated remolded loess were performed for different dry densities and .本文以杨凌黄土为研究对象,进行了不同初始干密度、不同初始含水率及不同固结度下的非饱和重塑黄土常规三轴剪切试验,在大量的试验研究基础上,分析了杨凌非饱和重塑黄土的强度指标和邓肯-张模型各计算参数随初始条件的变化规律。
4)remolded Loess true triaxial test重塑黄土真三轴试验
5)soft plastic loess软塑黄土
6)remolded soil重塑土
1.As undisturbed soil andremolded soil possess different structural features, they demonstrate different mechanical properties.原状土与重塑土具有不同的结构特征,于是表现出不同的力学性状。
2.With the comparative analysis of triaxial tests of undisturbed andremolded soil samples, the influences of structure on the stress-strain shear moduli of soil samples at the initial, medium and later stages of the test have been discussed, and from the microscopic angle, its causes are analyzed qualitatively.通过原状土样和重塑土样的三轴试验的对比分析 ,结构性对土样的应力应变切线模量在试验的初期、中期和后期的影响进行了探讨 ,从微观角度定性地分析其原因。
3.In laboratory,remolded soils are subjected to acid water immersion and tested for changes in their mineral compositions and shear strength after immersion with different durations.在实验室内用弱酸溶液浸泡蒙脱石、伊利石、高岭石3种重塑土试件,测试不同浸泡时间后试件矿物成分和抗剪强度的变化,以此模拟现场酸雨作用下滑面的形成过程。
延伸阅读
挤塑吹塑分子式：CAS号：性质：由挤出机挤出管状型坯，并将它垂挂在安装于挤出机头正下方的预先打开的模具型腔中。当下垂的型坯达到合格长度后立即合模，靠模具的切口将管坯切断，然后通过从模具分型面上的小孔插入的压缩空气吹管送入压缩空气，使型坯吹胀紧贴模壁而成型，然后脱模即成制品。
