确保你的电脑和你的树莓派连接同一个热点
1.让你的树莓派与你的电脑连接你的手机热点
树莓派使用命令行配置wifi连接 - 哔哩哔哩 ()
输入指令看到wlan0的RX与TX不是0就代表连接热点成功了
pi@raspbian:~$ sudo ifconfig wlan0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.243.125 netmask 255.255.255.0 broadcast 192.168.243.255
inet6 2409:8914:244:b7f:1f05:f093:abf3:30ce prefixlen 64 scopeid 0x0<global>
inet6 fe80::ceda:dbd1:2893:9ff9 prefixlen 64 scopeid 0x20<link>
ether dc:a6:32:29:13:8d txqueuelen 1000 (Ethernet)
RX packets 866 bytes 106471 (103.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 478 bytes 71486 (69.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
判断是否能访问Internet，可以Ping
pi@raspbian:~$ ping
PING www. (39.156.66.18) 56(84) bytes of data.
64 bytes from 39.156.66.18 (39.156.66.18): icmp_seq=1 ttl=50 time=44.7 ms
64 bytes from 39.156.66.18 (39.156.66.18): icmp_seq=2 ttl=50 time=58.7 ms
64 bytes from 39.156.66.18 (39.156.66.18): icmp_seq=3 ttl=50 time=59.0 ms
64 bytes from 39.156.66.18 (39.156.66.18): icmp_seq=4 ttl=50 time=41.8 ms
64 bytes from 39.156.66.18 (39.156.66.18): icmp_seq=5 ttl=50 time=42.4 ms
2.使用Putty连接树莓派
1>下载一个Putty
Download PuTTY - a free SSH and telnet client for Windows
2>查看树莓派的ip地址，在树莓派终端输入 sudo ifconfig，里面的192.168.243.125就是我们要的ip地址
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.243.125netmask 255.255.255.0 broadcast 192.168.243.255
inet6 2409:8914:244:b7f:1f05:f093:abf3:30ce prefixlen 64 scopeid 0x0<g
3>输入地址，然后连接
这里填写你的树莓派用户名，一般是 pi
这里填写你的树莓派密码，一般是raspberry
参考资料
(177条消息) SSH远程连接访问树莓派【无公网IP做内网穿透】_LisaCpolar的博客-CSDN博客_树莓派ssh连接
树莓派远程连接的三种方式总结 - 走看看 ()
